Rubber grommets, outlets, membranes
Grommets are used to join two pipes of different sizes or materials and provide a flexible, tight seal.
Diaphragms are flexible membranes that are used as baffles in pumps or valves to control fluid flow.
Couplings are used to connect two shafts, allowing torque to be transmitted while accommodating misalignment.
The feet are rubber components used as shock absorbers or to ensure the stability of the device.
Tubes, covers and suction cups are also made of rubber and are used for a variety of applications including sealing, cushioning and gripping.

PRODUCT DESCRIPTION
Description and use
Rubber transitions
Rubber transitions are used to join pipes of different sizes or materials and provide a flexible, leak-proof seal. So they are needed to absorb any tension or movement between the tubes, which is how I want the joint to remain secure. Rubber transitions are commonly used in the plumbing, HVAC and automotive industries. They are made of high-quality rubber materials to ensure their long life and resistance to chemicals and temperature changes.
Membranes
Diaphragms are flexible rubber parts used as baffles in pumps or valves. They are responsible for controlling the flow of liquid and ensure that the liquid flows only in the desired direction. Membranes are an essential part of liquid handling systems and are used in many industries including the medical, chemical and food industries. Materials used in diaphragms are carefully selected to ensure compatibility with the fluids they handle, wear resistance or meet specific standards.
CouplingsCouplings are used to connect two shafts, allowing torque to be transmitted while accommodating misalignment. Commonly used in machinery and power transmission systems, they are designed to fully accommodate axial, radial or angular misalignment between shafts. Couplings are manufactured from high quality rubber materials to ensure that it meets the demands of high speed and high torque applications.
Legs
Feet are rubber components used as shock absorbers or to provide stability devices. They are used to isolate the equipment from vibrations and shocks that may occur during operation, ensuring its smooth and efficient operation. Feet are used in a wide range of applications including electronic equipment, medical devices and industrial machinery. They are made from high-quality rubber materials to ensure their long-term protection and resistance to environmental influences.
Tubes, lids and suction cups
Tubes and additions are also made of rubber and are used in various applications. Tubes are used for sealing, damping and insulation, while covers are used to protect equipment and components. Suction cups are used to grip, lift and manipulate materials. All three components are made of high-quality rubber materials, which lasts a lifetime and is resistant to wear.
Properties
Performances
Material basis
Technical documentation
Description and use
Polyethylene (PE) gasketsThey are characterized by high resistance to corrosion and stress and very good mechanical and physical properties. They do not contain any additives and are resistant to standard weather conditions and temperatures from -15 °C to + 70 °C without changing the performance properties, however, with prolonged sun exposure, there is a slow aging process. They are made of a granulate with a specific weight of 0.92 g / cm3, and a hardness of approximately 47 °ShD.Metal Reinforced Gasket (MRG)These gaskets are produced by co-extrusion of a steel strip and other material or several materials. This combination enhances the properties of primary materials for a specific purpose in several industries, especially automotive. This type of gasket replaces inconvenient gaskets that are loosely inserted, glued, or otherwise assembled. The properties of the individual gaskets are given by the materials combined in series.Flocked gasketsFlocked gaskets are made as a combination of rubber and flock. The result of this process is a gasket that is used in several industries, mainly automotive or rail. This type of gasket replaces inconvenient gaskets that are loosely inserted, glued, or otherwise assembled. The properties of the individual gaskets are given by the materials combined in series.
Properties
Performances
Material basis
Technical documentation
SAMPLES OF PROFILES
Other profiles (PE, FLOCK)

PRODUCT DESCRIPTION
Description and use
Polyethylene (PE) gasketsThey are characterized by high resistance to corrosion and stress and very good mechanical and physical properties. They do not contain any additives and are resistant to standard weather conditions and temperatures from -15 °C to + 70 °C without changing the performance properties, however, with prolonged sun exposure, there is a slow aging process. They are made of a granulate with a specific weight of 0.92 g / cm3, and a hardness of approximately 47 °ShD.Metal Reinforced Gasket (MRG)These gaskets are produced by co-extrusion of a steel strip and other material or several materials. This combination enhances the properties of primary materials for a specific purpose in several industries, especially automotive. This type of gasket replaces inconvenient gaskets that are loosely inserted, glued, or otherwise assembled. The properties of the individual gaskets are given by the materials combined in series.Flocked gasketsFlocked gaskets are made as a combination of rubber and flock. The result of this process is a gasket that is used in several industries, mainly automotive or rail. This type of gasket replaces inconvenient gaskets that are loosely inserted, glued, or otherwise assembled. The properties of the individual gaskets are given by the materials combined in series.
Properties
Performances
Material basis
Technical documentation
Description and use
Polyethylene (PE) gasketsThey are characterized by high resistance to corrosion and stress and very good mechanical and physical properties. They do not contain any additives and are resistant to standard weather conditions and temperatures from -15 °C to + 70 °C without changing the performance properties, however, with prolonged sun exposure, there is a slow aging process. They are made of a granulate with a specific weight of 0.92 g / cm3, and a hardness of approximately 47 °ShD.Metal Reinforced Gasket (MRG)These gaskets are produced by co-extrusion of a steel strip and other material or several materials. This combination enhances the properties of primary materials for a specific purpose in several industries, especially automotive. This type of gasket replaces inconvenient gaskets that are loosely inserted, glued, or otherwise assembled. The properties of the individual gaskets are given by the materials combined in series.Flocked gasketsFlocked gaskets are made as a combination of rubber and flock. The result of this process is a gasket that is used in several industries, mainly automotive or rail. This type of gasket replaces inconvenient gaskets that are loosely inserted, glued, or otherwise assembled. The properties of the individual gaskets are given by the materials combined in series.