We produce rubber molded products and profiles according to your drawings from molds specially made for you from the following elastomers:
Polyacrylate rubber excellent resistance to hot oils, dry heat, good resistance to aging, ozone and weather conditions, suitable for parts with special requirements for oil and high temperature resistance e.g. in automobiles, engines and in the manufacture of devices. in automobiles, engines and in the manufacture of devices.
Epichlorohydrin rubber very high resistance to swelling in contact with mineral oils and fuels, high heat resistance, the best ozone resistance, the lowest gas and fuel permeability, good fire-fighting properties, good flexibility at low temperatures, used in automotive industry .
Chloroprene rubber excellent resistance to weather conditions, ozone and inflammation conditional oil resistance not resistant to petrol, benzene, toluene, ester and ketone.
Chlorosulfonated polyethylene good resistance to ozone, aging, acids and number of chemicals, good resistance to electric breakdown and good resistance to inflammation conditional oil resistance
Ethylene Acrylate Rubber excellent resistance to hot oils, dry heat, better behavior at lower temperatures than ACM, good resistance to ozone and weather conditions.
Ethylene propylene diene monomer rubber resistant to atmospheric influences, ozone and ultraviolet radiation, good chemical resistance to many alkalis, acids, water, detergents not suitable for petrol and mineral-based oils and fats
Fluoro rubber usable temperature range from -20 °C to + 310 °C, very ggod mechanical properties even at higher temperatures, excellent resistance to ozone, oxygen, heat, oils, many solvents, fuels, chemicals not resistant to alkalis, low absorption rate and very good electrical insulation values
Temperature range from -60 °C to + 220 °C, not suitable for steam, excellent resistance to aging, ozone, fuels, solvents, chemicals, mineral oils and fats, main usability: aviation and cosmonautics, automotive industry.
Hydrogenated nitrile butadiene rubber excellent mechanical values, good tear resistance when hot, for peroxidically cross-linked vulcanizate, very good flexibility, good behavior at low temperatures, excellent abrasion resistance, good/excellent pressure deformation difference, excellent aging resistance (ozone, hot air), good/excellent resistance to a lot of technical oils even in the presence of aggressive media, such as hydrogen sulfide and amines
Butyl rubber excellent resistance to oxygen, ozone, aging, high temperatures, steam, chemical action, low gas permeability, very little flexibility and therefore good damping not resistant to mineral oils and fats.
Nitrile butadiene rubber excellent resistance to swelling in contact with mineral fats, oils and petrol, good abrasion resistance not resistant to benzene, aromatic, ester and chlorinated hydrocarbons.
Natural rubber natural product, it is characterized by the highest flexibility, tensile strength and excellent physical properties not suitable for petrol, benzene, oils, fats, high temperatures and ozone.
Good chemical resistance excellent sliding properties very low absorption rate low permeability to gases and vapors.
Polyvinyl chloride synthetic thermoplastic excellent insulation properties excellent chemical resistance low permeability to gases and vapors good weather conditions properties excellent mechanical properties
Polyvinyl chloride synthetic thermoplastic excellent insulation properties excellent chemical resistance low permeability to gases and vapors good weather conditions properties excellent mechanical properties
Styrene-butadiene rubber good mechanical properties, high resistance to the formation of bending cracks and aging in air, resistant to alcohol, acetol, glycol and alkalis not resistant to petrol, benzene, mineral oils and fats.
Resistant to atmospheric influences, ozone and ultraviolet radiation good chemical resistance good resistance to water and detergents. Excellent resistance to bending fatigue. Good electrical properties Good tear and abrasion resistance recyclability not suitable for petrol and mineral-based oils and fats high level of performance throughout the life of the component not suitable for petrol and mineral-based oils and fats .
Thermoplastic (SBS, SEBS) resistant to atmospheric influences, ozone and ultraviolet radiation good chemical resistance good resistance to water and detergents Excellent resistance to bending fatigue Good electrical properties Good tear and abrasion resistance recyclability Excellent resistance to chemicals and weather conditions low compression set High elasticity not suitable for petrol and mineral-based oils and fats
Silicone rubber usable temperature range from -60 °C to + 240 °C, not suitable for steam, very good resistance to aging, ozone, water and mineral oils, good electrical properties, physiologically harmless, tasteless and odorless
All rights reserved © 1992 - 2020 | Majk sro
